Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Dozuki System

Edit approved by Dozuki System


Step Lines

+[* black] Clip the meter probes to the plug's outer prongs.
+[* black] Clip jumper wire across the outer cord terminals.
+[* black] Bend and pull the cord. Replace the cord if the multimeter reads above zero ohms or fluctuates.
+[* black] Clip the jumper across the middle and one outer terminal, then clip the multimeter to the corresponding plug prongs. Look for steady zero-ohms readings. If readings fluctuate, replace the cord and/or plug.

Image 1

No previous image