Skip to main content
Help
/

Site Navigation

Your Account

Choose Language

Editing Step 5 —

Step Type:

Drag to rearrange

For the tabletop core, we used smooth ¾" plywood, 2'×2'. For more durability, use exterior plywood. The top surface is 1/8" dry-erase board.

Cut a slightly oversized piece of dry-erase board and laminate it to the plywood using Weldwood (“The Original”) contact cement. Follow the container directions exactly. After pressing the 2 pieces tightly together, trim all sides and sand the edges smooth. Avoid scratching the dry-erase surface.

Lay out the 4 identical corners. A combination square is helpful. Draw the radius at the back of each slot with a thin ring of 3"-ID pipe, then use a compass or the end of a ¾" dowel to mark the 8 radii at the slot ends.